K Factory - Kyosho RRR parts
(Source: K-Factory)
 |
|
 |
K1446 G4 Lightweight Composite 9mm Pivot Ball (2) |
 |
|
 |
K1447 G4 Lightweight Composite 9mm Pivot Ball (8) |
|
|
 |
K1448 G4 Alum. Pivot Ball Nut & Teflon Washer(2)-Blue |
|
|
 |
K1449 G4 Alum. Pivot Ball Nut & Teflon Washer(8)-Blue |
|
|
 |
K1488 G4 ST Steel Universal Joint (2) (for V1RRR front as well) |
|
|
 |
K1498 G4 Real Racing Brake Pads (glued with plate, for most Kyosho cars)
(pair) |
|
|
 |
K1901 V1RRR/MP777/7.5 Balanced Ventilation Brake Disc (1) |
|
|
 |
K1902 V1RRR ST Steel Hardened Hinge Pin Set (6) |
|
|
 |
K1903 V1RRR ST Steel F Upper Hinge Pin (2) |
|
|
 |
K1904 V1RRR ST Steel F Lower Hinge Pin (2) |
|
|
 |
K1905 V1RRR ST Steel R Lower Hinge Pin (2) |
|
|
 |
K1906 V1RRR 4mm Front Carbon Shock Tower |
|
|
 |
K1907 V1RRR 4mm Rear Carbon Shock Tower (w/alum. stiffener) |
|
|
 |
K1908 V1RRR 4mm Carbon Bumper Top Plate (w/alum. stiffener) |
|
|
 |
K1909 V1RRR Special Rear Mount (alum. & carbon combo) |
|
|
 |
K1910 V1RRR Alum. One Piece 27T Front One Way / Solid Axle Set |
|
|
 |
K1911 V1RRR ST Steel Rear Universal Joint (2) |
|
|
 |
K1912 V1RRR Special 3mm Alum. 7075 Chassis (w/carbon stiffener) |
|
|
 |
K1913 V1RRR Alum. Smart Middle Mount & 7075 Middle Shaft (for K1912 only) |
|
|
 |
K1914 UFO Push Type Clutch Set (for Kyosho V1RRR) |
|
|
 |
K1914-1 UFO Hard Coated Alum. Push Type Clutch Housing (w/remove holes) (for V1RRR) |
|
|
 |
K1914-2 UFO Push Type Clutch Set Thrust Bearing Retainer (for V1RRR) |
|
|
 |
K1915 V1RRR Hard Coated 7075 Alum. Light 16T Clutch Gear |
|
|
 |
K1916 V1RRR Hard Coated 7075 Alum. Light 17T Clutch Gear |
|
|
 |
K1917 V1RRR/FW05 Hard Coated Alum. Light 20T Clutch Gear |
|
|
 |
K1918 V1RRR/FW05 Hard Coated Alum. Light 21T Clutch Gear |
|
|
 |
K1919 V1RRR/FW05 Hard Coated Alum. Light 22T Clutch Gear |
|
|
 |
K1920 V1RRR/FW05 Alum. Lower Spring Cup (4) |
|
|
 |
K1921 V1RRR/FW05 Alum. 5th Body Post |
|
|
 |
K1922 V1RRR/FW05 Hard Coated Alum. One Way Hub (w/bearing) |
