Team Losi now offers their race proven 2WD Buggy
Taper-Pin front tires in their exclusive “Pink” compound.
Racers have found that the Taper-Pin tread design works extremely
well on hard packed and blue groove type surfaces. The LOSA7207P
Buggy Front Taper-Pins feature the popular extra-wide body carcass
with Team Losi’s unmatched Taper-Pin tread design. Like all
Team Losi Racing tires, these 2WD Taper-Pin fronts include a pair
of precision cut firm foam inner liners for proper support and
performance.
LOSA7207P Front Taper-Pin Tires w/Foam (Pink)
CV Driveshaft's
for the Mini-LST
Team Losi listened to the serious racers out
there and now offer CV Driveshaft's for the Mini-LST. The LOSB1244
CV Driveshaft set includes precision machined CV type Driveshaft,
axles, and all hardware similar to those used on larger models
raced around the world. You can expect the same performance,
tight tolerances, and quality fit found on all Team Losi "Mini" performance
parts. These trick drivetrain components are available in a complete
set with all service/replacement parts available separately.
LOSB1244 CV Driveshaft Set (MLST)
LOSB1245 CV Driveshaft (MLST)
LOSB1246 CV Driveshaft Axle (MLST)
LOSB1247 CV Driveshaft Rebuild
Set (MLST)
Dish Wheels for the Mini-LST
When it comes to racing the "Dish" wheel
is number one. The new LOSB0977 (White) and LOSB0978 (Yellow) "Mini-Dish" racing
wheels are just like those used on virtually all off-road racing
trucks. These wheels are molded in tough impact resistant material
and offer both improved performance and remarkable durability.
Team Losi now offers optional suspension tuning
springs for their 1/18 scale mini monster truck the Mini-LST. The
LOSB0955 Soft and LOSB0956 Firm springs allow you to fine tune
the suspension as you prefer.The LOSB0956 Firm (Blue) springs have
a higher rate than the stock rear (Green) springs and will be useful
when running on high grip surfaces or when negotiating big jumps.The
LOSB0955 Soft (White) springs have a lower rate than the stock
front (Silver) springs and will be useful when running over real
bumpy or aggregate type surface where you need the shocks to work
quickly. Both of these new spring are sold in a set of four so
you can try them on all four corners or mix and match different
rate springs front and rear to fine tune your Mini-LST.
The LOSB0983 "Mini ATX" is a direct
copy of the all terrain tire currently used on the giant LST2 nitro "Super
Truck". This design has proven to be exceptional on pavement
and carpet as well as hard dirt. The tires include precut foam
inner liners and are best glued with the LOSA7880 tire glue. For
those of you not wanting to glue up your own tires look for the
Mini-ATX to be available pre-mounted in the immediate future.
LOSB0983 "Mini-ATX" Tires w/Foam Liners
Mini LST "Mini King
Pin" Tires
Team Losi turned to the race proven "King-Pin" design
for those wanting a killer dirt tire to produce the LOSB0982 "Mini-Kingpin".
This tire has become a favorite in all forms of off-road truck
racing. The tires include precut foam inner liners and are best
glued with the LOSA7880 tire glue. For those of you not wanting
to glue up your own tires look for the Mini-Kingpin to be available
pre-mounted in the immediate future.