HPI Hellfire News

86527 - Hellfire Front Suspension Mount Adjustable Kick Up

This optional mount allows further geometry adjustment beyond the standard front mount. This suspension mount allows the front kickup/ anti-dive to be adjusted to be adjusted from -2.0 to +2.0 at the inboard pins in 0.5 degree increments. The extended range in the positive direction allows the truck to fine tuned to bumpier tracks and more control of the steering feel of the truck.

86542 - Hellfire Top Shock Cap (Purple)

This part increases the durability compared to the standard resin part and increases the precision of the shock top. In addition, it adds a bit of purple bling for custom looks.

86546 - Suspension Shaft 3x45mm (Titanium Nitride Coating)

These titanium nitride coated shafts reduce friction and add durability.

86547 - Suspension Shaft 4x77.5mm (Titanium Nitride Coating)

These titanium nitride coated shafts reduce friction and add durability.

86548 - Suspension Shaft 3x43mm (Titanium Nitride Coating)

These titanium nitride coated shafts reduce friction and add durability.

86556 - Hellfire Billet Front Brace (Black)

This machined 7075 front brace replaces the stock plastic brace. It is stronger and reduces chassis flex between the upper deck and the lower chassis. For a pure performance, strictly function type of look, it is black anodized and has a laser etched hpi logo.

86557 - Hellfire Billet Front Tower Brace (Black)

This machined 7075 front tower brace replaces the stock plastic brace. It is stronger and creates a more rigid connection between the upper deck and the front shock tower. This rigid connection allows the front suspension to work more efficiently and better protects the front tower in crashes and hard landings. For a pure performance, strictly function type of look, it is black anodized and has a laser etched hpi logo.

86558 - Hellfire Billet Rear Tower Brace (Black)

This machined 7075 front tower brace replaces the stock plastic brace. It is stronger and creates a more rigid connection between the upper deck and the rear shock tower. This rigid connection allows the rear suspension to work more efficiently and better protects the rear tower in crashes and hard landings. For a pure performance, strictly function type of look, it is black anodized and has a laser etched hpi logo.

86583 - Hellfire Billet Engine Plate (Purple)

This optional 7075 engine plate increases the bracing potential over the stock engine plate by adding material along the engine mount. It is more rigid than the stock stamped part and the extended arm prevents the clutch bell from hitting the chassis and stalling the engine after hard landings. In addition, it offers a more precise alignment of the engine.

86587 - Billet Heavy Duty Shock Tower

This 5mm thick, hard anodized, 7075 shock tower greatly increases strength compared to the standard part and resists bending. The camber mounting holes are repositioned for finer tuning adjustment range of your roll centers. These towers are compatible with both plastic chassis braces and the optional 7075 chassis braces and are designed to precisely seat in the chassis bulkheads.

87531 - Hellfire Billet Steering Plate (Black)

This steering plate has been lightened and shaped to allow more clearance at extreme suspension angles. For a pure performance, strictly function type of look, it is black anodized and has a laser etched hpi logo.