RPM News

(Source: RPM)

Revolver Truck Wheels

Pull the trigger on the competition when you equip your ride with some loaded Revolvers from RPM! Our Revolvers for 1/10th scale trucks are scaled up versions of our Revolvers for 1/18th scale trucks. These larger versions have the same great looks, ultra-lightweight, and rugged durability of their little brothers but fit many of the most popular 1/10th scale trucks available today. Features include a 10-hole pattern blended perfectly with a sweeping dished face while the front edge features 30 faux rivets and a simulated 5 lug bolt pattern for a more authentic, scale appearance. Concours-winning looks are a trip to your local hobby shop away!

RPM

Bully Truck Wheels

RPM Bully wheels for 1/10th scale trucks redefine what a Bully really is. RPM Bully wheels are wickedly good-looking, about as light as you can get, and can dish out and handle punishment like the biggest Bully from your worst childhood nightmares! We’ve taken our 1/18th scale Bully Wheels and blew them up to fit most popular 1/10th scale trucks. These wheels feature a smooth, flowing 5-spoke pattern that combines fluid, smooth flowing lines with a brutally aggressive look. Mount a set on your ride and if the competition won’t get out of your way, knock ‘em out!

RPM

Jato Wide Front Bumper

RPM Wide Front bumpers have become the standard for bulletproof front-end protection. RPM customers have reported that some of the Jato’s internal chassis components are somewhat fragile and in need of added front-end protection from an RPM wide front bumper. By absorbing a large amount of impact force instead of transferring that energy into the chassis, our new 6” wide front bumper can help reduce or possibly eliminate damage to internal chassis components from front-end crashes and collisions. RPM Jato Bumpers have strengthening ribs built in that have a multi-purpose design as well; The ribs not only add strength to the bumper; they act as low friction skid rails allowing the chassis to transition over rough surfaces easily. Additionally, We’ve recessed the mounting screws below the skid surface of the bumper to help protect the screw-heads from damage and dirt build-up. Our wide front bumpers are 130% thicker than the stock bumper adding critical front-edge chassis protection that the stock bumper does not provide.

80322 Traxxas Jato Wide Front Bumper - Black
80325 Traxxas Jato Wide Front Bumper - Blue

RPM
RPM

Jato Front A-arms

RPM front A-arms for the Traxxas Jato are designed as dual-purpose A-arms that can handle the rigors of the backyard basher as well as the hardcore racer. These A-arms have been designed to be more rigid than stock, yet under extreme situations will give slightly to prevent them from breaking and reduce the energy from those impacts from transferring into the more fragile components of the vehicle, which can be harder and more expensive to replace. The rigidity of the new A-arms will please even the most demanding of racers.

RPM Jato A-arms are designed using stock geometry, making them direct, bolt-in replacement parts. Furthermore, we’ve reduced the clearances around the hinge pins and A-arm mounting areas to help reduce slop in the suspension system, providing better, more consistent camber, caster, toe, and wheelbase settings. RPM Jato A-arms use stock mounting hardware – nothing more to buy. RPM A-arms for the Traxxas Jato are sold in pairs, and are molded in blue or black from our bulletproof blend of top-secret materials for the ultimate combination of strength, durability, & wear-resistance in a lightweight set of A-arms that won’t leave your wallet empty! RPM A-arms are the toughest arms you can buy and we back that statement with a lifetime breakage warranty*. RPM A-arms are the last set of arms you’ll ever need for your Traxxas Jato!

80722 Black Front Jato A-arms
80725 Blue Front Jato A-arms

RPM
RPM

Jato Rear A-arms

RPM Rear A-arms for the Traxxas Jato feature everything you've come to expect from RPM products - durability, strength, light weight, and the best possible value. RPM rear Jato A-arms have been redesigned to fit in the stock locations with less end-play than stock A-arms at both the inner and outer hinge pins, yet still retain all stock geometry for near perfect fits every time! Combined with a set of RPM Front Jato A-arms, your racing confidence will skyrocket because you won't have to worry about breaking fragile, stock a-arms any longer. Check out the description of our Front Jato A-arms below for additional features also built into our rear A-arms.

80752 Black Rear Jato A-arms
80755 Blue Rear Jato A-arms

RPM
RPM

Traxxas Revo Axle Carriers & Oversized Bearings

RPM axle carriers for the Traxxas Revo have been painstakingly redesigned to improve the durability, strength, and reliability of these much-abused parts. Check out this laundry list of features built into each set of RPM Revo carriers:

Axle Carriers:
-Stock replacement – no modifications are needed to bolt them in.
-Larger bearing bores accept RPM oversized bearings.
-Included in each kit are two 15mm bearings and two 21mm bearings.
-The wall thickness around the pillow-balls has been increased by 40% - eliminating split walls!
-More than 20% more material supports the pillow-balls, preventing them from pulling through.
-Redesigned reinforcing rib supporting the tie rod mount.
-Redesigned boot lock tabs making removal of the silicone boots easier.
-Press-fit bearings in the carrier means reduced movement of the axle in the carrier.

Oversized Bearings:
-Outer bearings are 6x15x5mm (stock is 6x12x4mm).
-Inner bearings are 12x21x5mm (stock is 12x18x4mm).

Wider bearings create an additional 2mm of contact with the axle for smoother, longer running performance. 3mm larger bearings have balls a full 33% larger than stock! The load ratings of RPM oversized bearings are double that of stock bearings and more than triple the fatigue rating of stock bearings as well!

Pillow-Ball Setscrews:
- Two-piece design uses aluminum and Delrin for the ultimate in holding power under extreme situations.
-Our aluminum setscrews reduce movement of the pillow-balls in the carrier.
-Our Delrin bushing caps have more than twice the contact area on the pillow-ball, keeping the pillow-balls locked in place at all times.

RPM Revo axle carriers are sold with 1 left and 1 right axle carrier, 2 outer 15mm bearings, 2 inner 21mm bearings, 4 aluminum setscrews, 4 Delrin bushing caps, and detailed instructions to help install them on your truck. Replacement bearing sets (#80570) come with 2 inner 21mm bearings & 2 outer 15mm bearings.

80570 Revo Replacement Oversized Bearing Set
80581 Revo Axle Carriers & Bearings - Dyeable White
80582 Revo Axle Carriers & Bearings - Black
80585 Revo Axle Carriers & Bearings - Blue

RPM
RPM
RPM

 

Partenaires de RC Infos:

Retour en haut de page    |    Retour à la page précédente

Charte d'utilisation    |    Contact    |    RCi sur Twitter    |    RCi sur Facebook

Copyrights © :   AdaptaWeb  /  RC Infos    |    Dernière mise à jour:  Vendredi 09 octobre 2015