The Crowd Pleazer 2.0 body has proven itself as
the highest performing body on the market. Now Pro-Line is continuing
the legacy with the release of the Crowd Pleazer 2.0 for the new
REVO® 3.3.
Just as you have come to expect with other Crowd Pleazer 2.0 bodies,
the 3.3 version is no different. It incorporates ultra-low styling,
original bodylines, and functionality to bring you the latest in
high-performance race technology. Unlike most bodies, however,
the Crowd Pleazer 2.0 is totally dedicated for the REVO® 3.3.
Body mount locations, gas tank filler hole, and fuel tank filler
strap hole have all been indicated on the body for ease of fitment.
When you’re looking to replace your body with award winning
and national championship performance, check out the all-new Crowd
Pleazer 2.0 for the REVO® 3.3.
#1133 - Hole
Shot MTR Standard Size Tire
The wait is over. Pro-Line introduces the next
generation carcass design for standard monster truck wheels and
the latest tire tread with the release of the Hole Shot MTR tire.
The Hole Shot MTR was developed after numerous requests for an
all-around better handling tire on blue-groove and hard-packed-type
tracks. In order to produce the best tire possible under these
conditions, a narrower carcass than the MT tire was created along
with a small-pin design. The smaller pins are less flexible than
the Crime Fighter making it a force to be reckoned with on hard-packed
conditions. Additional features such as large inner ribbing reduce
tire stretching under acceleration, the outer side pins are angled
for greater corner speed and less rut catching, and inner sidewall
ribbing was created to reduce side-to-side flex, thus insuring
greater overall tire response and control.
When you’re looking for an alternative tire for those hard-packed,
blue-groove type surfaces, then check out Pro-Line’s all-new
Hole Shot MTR for standard monster truck wheels.
#6023 - High
Downforce 1:8 Wing Kit
The wait is over 1:8 fans! Pro-Line releases a
second version of its popular 1:8 wing kit in a high downforce
version.
Higher downforce is produced from two new design features. The
first is a lower deck height on the outer portions of the wing.
The creates more airflow to the rear element. The second is a more
vertical rear element. In addition to the higher downforce design,
it also comes complete with body clips, body clip washers, and
a full detail decal sheet including number plates.
When you’re looking for the latest in 1:8 styling and performance,
check out Pro-Line’s all-new 1:8 High-Downforce Performance
Wing.
#6023-02 Yellow
#6023-04 White
#3225 - Desert
Rat fits T/E-2.5-MAXX, Savage, REVO
An all-new proprietary design from Pro-Line captures
the essence of Baja desert racing and the latest in off-road trendiness.
Introducing the aggressive Desert Rat body for T/E/2.5-MAXX™,
Savage and REVO® trucks.
The Desert Rat body is the epitome of bold designs. It’s
extremely pronounced fenders offer more clearance for those oversized
tires, low profile styling make for fast straight line speed, and
it’s equipped with simulated side mirrors just like the full-scale
Baja trucks. And not too worry it’s made from .060 thick
lexan, the toughest on the market, so it’s as durable as
the punishment you throw at it.
When you’re looking to conquer the desert or any tough terrain,
conquer it in style with Pro-Line’s new Desert Rat body.
1/8 off road
tires mounted on Velocity dish wheel
Pro-Line’s new pre-mounts allow more time
for tuning, are truer than the average mounted tire, are adhered
with an ultra-bond CA for a secure, worry free bond, and are backed
with Pro-Line quality. Never again will you have to worry about
misaligning the tire with the wheel, not finish a qualifier or
main event due to glue failure, or worry about making your next
run in time with pre-mounted Pro-Line tires for 1:8 buggies.